Supply For 820SERIES

Supply For 820SERIES Reviews

Other Picture

Supply For 820SERIES Feature

• General Accessories
• Product Type: Accessory
• Part Number: AO-32480-43
• Package Quantity: EACH

science-lab-flowmeters

Visit Store Now !!

Detail Products

Detail Reviews

<b>AC Switch</b> for spring-loaded in-line flowmeters, 0.5 A max, 115 VAC <tol>10%

AC Switch for spring-loaded in-line flowmeters, 0.5 A max, 115 VAC 10% Reviews

Other Picture

AC Switch for spring-loaded in-line flowmeters, 0.5 A max, 115 VAC 10% Feature

• Replacements Accessories
• Product Type: Accessory
• Part Number: AO-03231-80
• Package Quantity: EACH

science-lab-flowmeters

Visit Store Now !!

Detail Products

Detail Reviews

Flow Indicator for Liquids; Brass, 1" NPT(F)

Flow Indicator for Liquids; Brass, 1" NPT(F) Reviews

Other Picture

Flow Indicator for Liquids; Brass, 1" NPT(F) Feature

• Flow Indicators
• Max operating temperature (° F): 180
• Max operating temperature (° C): 82
• Max pressure: 200 psi at 70°F (21°C)
• Process connection: 1" NPT(F)
• Manufacturer number: 181681
• Brand: Cole-Parmer
• Part Number: AO-32779-09
• Package Quantity: EACH

All flow indicators feature a paddle-wheel that spins at a rate proportional to the flow. Lens can be removed with a 1/4 turn for easy cleaning. Use with fluids that have a viscosity less than 34 centipoise (150 µm filter is recomended for protection). Indicators feature a bright orange rotor that spins to provide visual verification.

Visit Store Now !!

Detail Products

Detail Reviews

Hedland H621-018 EZ-View Flow Meter, Polysulfone, For Use With Water, 3.0 - 18 gpm Flow Range, 1" NPT Male

Hedland H621-018 EZ-View Flow Meter, Polysulfone, For Use With Water, 3.0 - 18 gpm Flow Range, 1" NPT Male Reviews

Other Picture

EZ-View Flow Meters For Water. 1 inch ports. EZ to install, in any position. Polysulfone bodies for standard applications. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 brass, Limit Indicators: Polypropylene, Retaining Ring: PH15 – 7MO stainless.

Visit Store Now !!

Detail Products

Detail Reviews

Cole-Parmer Flowmeter System, Direct-Reading Flowtube for Air 150mm; 5 LPM

Cole-Parmer Flowmeter System, Direct-Reading Flowtube for Air 150mm; 5 LPM Reviews

Other Picture

Cole-Parmer Flowmeter System, Direct-Reading Flowtube for Air 150mm; 5 LPM Feature

• Direct-Reading Flowtubes for Air
• Description: Variable Area, Direct Reading Flowmeter
• Accuracy: ±2% of full scale
• Material (Flow Tube): Borosilicate
• Material (float): Sapphire
• Max operating temperature (° F): 250
• Max operating temperature (° C): 121
• Max pressure: 200 psi
• Process connection: 1/8" NPT(F)
• Repeatability: ±0.25% full-scale
• Manufacturer number: 102-01S
• Brand: Cole-Parmer
• Part Number: AO-32047-64
• Package Quantity: EACH

science-lab-flowmeters

Visit Store Now !!

Detail Products

Detail Reviews

Cole-Parmer 65-mm Correlated Flowmeter , Brass Glass float; For Liquids and Gases, With Valve

Cole-Parmer 65-mm Correlated Flowmeter , Brass Glass float; For Liquids and Gases, With Valve Reviews

Other Picture

Cole-Parmer 65-mm Correlated Flowmeter , Brass Glass float; For Liquids and Gases, With Valve Feature

• Correlated Flowmeters with Standard Valves
• Compact size makes these ideal for tight measuring areas
• Clear polycarbonate front shield magnifies scale 16%.
• A vertical tangential locator line ensures hairline accuracy in reading float position.
• Each flowmeter consists of a heavy-walled glass flowtube mounted in an anodized aluminum frame with
• Minimum flow rate is less than one tenth of the maximum flow value in the ordering table.
• Select a flowmeter with a high-precision valve for superior flow rate controlideal for low-flow appl
• The 16-turn high-precision valve features a nonrising stem to more accurately hit your desired set p
• Description: Variable Area, Correlated Flowmeter
• Flow rate (CO2): 6.6 mL/min
• Flow rate (O2): 5.1 mL/min
• Flow rate (N2): 5.6 (mL/min)
• Flow rate (Ar): 4.3 mL/min
• Flow rate (H2): 14 (mL/min)
• Accuracy: ±2% full-scale
• Material (fitting): Chrome-Plated Brass
• Material (Valve): Chrome-Plated Brass
• Material (o-ring): Buna-N
• Material (Flow Tube): Borosilicate Glass
• Material (Housing): Brass
• Material (float): Glass
• Max operating temperature (° F): 250
• Max operating temperature (° C): 121
• Max pressure: 200 psi
• Process connection: 1/8" NPT(F)
• Repeatability: ±0.25%
• Manufacturer number: P14/6-N042-07G
• Brand: Cole-Parmer
• Part Number: AO-03293-00
• Package Quantity: EACH

All flowmeters come with correlation data sheets for water and air at standard temperature and pressure (STP). We can also supply calibration data for oxygen, nitrogen, hydrogen, helium, CO2, argon, other liquids and gases, and for conditions other than STP—call our Application Specialists for more information.

Visit Store Now !!

Detail Products

Detail Reviews

Flow Meter, 3/4 in. Alum, 15/150scfm Air Aluminum Body, NPTF Connection

Flow Meter, 3/4 in. Alum, 15/150scfm Air Aluminum Body, NPTF Connection Reviews

Other Picture

Flow Meter, 3/4 in. Alum, 15/150scfm Air Aluminum Body, NPTF Connection Feature

• Hedland Flow Meters for Air and Other Compressed Gases
• Description: Variable Area, Direct Reading Flowmeter
• Max operating temperature (° F): 240
• Max operating temperature (° C): 115.5
• Brand: Hedland
• Model: H771A-150
• Part Number: AO-32511-02
• Package Quantity: EACH

FEATURES Direct readings Install in any position 360&Deg; Rotatable Guard/Scale Easier to Read Linear Scale No Flow Straighteners or Special Piping Required Insensitive to Shock and Vibration Good Viscosity Stability Temperature up to 240&Deg;F Accuracy +/-2% Full Scale Repeatability +/-1% Special Scales Available

Visit Store Now !!

Detail Products

Detail Reviews

Brass Flowmeters for Water withstand pressures to 3500 psi. Wetted parts include brass, 303 SS sprin

Brass Flowmeters for Water withstand pressures to 3500 psi. Wetted parts include brass, 303 SS sprin Reviews

Other Picture

Brass Flowmeters for Water withstand pressures to 3500 psi. Wetted parts include brass, 303 SS sprin Feature

• Brass Flowmeters for Water
• Graph-style flowmeters are ideal for applications with changing pressures.
• Install in any configuration-even next to a bend in your pipeline
• Description: Variable Area, Direct Reading Flowmeter
• Dimensions: 2-1/2 W x 7-3/16 H x 2-15/16 D
• Accuracy: ±2% full-scale
• Material (Housing): Brass
• Max operating temperature (° F): 240
• Max operating temperature (° C): 115.5
• Max pressure: 3500 psi
• Process connection: 3/4" NPT(F)
• Repeatability: ±1%
• Manufacturer number: HC705B-010
• Brand: Cole-Parmer
• Part Number: AO-32204-14
• Package Quantity: EACH

These new rugged flowmeters are ideal for your high pressure industrial applications. A calibrated retention spring eliminates the need to mount flowmeters vertically or run straight lengths of pipe prior to or after the meter. The piston/spring design makes these meters less sensitive to shock and vibration than other variable area flowmeters. Use graph-style flowmeters when your application has changing pressures-eliminating the need for calculating correction factors. Siimply read your flow from the graph where the pressure line intersects with the indicator. Models with a built-in psi gauge ensure accurate pressure readings directly at the inlet of the flowmeter. Choose models with built-in switches for high and low limit flow control by triggering alarms, starting and stopping pumps, or opening and closing valves.

Visit Store Now !!

Detail Products

Detail Reviews

160S72:Sin Pitot Tube 72in Insertion Leng 5/16in Diameter W/Pair Of 1/8inNPT To 3/16in Id Adapters

160S72:Sin Pitot Tube 72in Insertion Leng 5/16in Diameter W/Pair Of 1/8inNPT To 3/16in Id Adapters Reviews

Other Picture

160S72:Sin Pitot Tube 72in Insertion Leng 5/16in Diameter W/Pair Of 1/8inNPT To 3/16in Id Adapters Feature

• Dwyer S Type Stainless Steel Pitot Tubes
• Model: 160S-72
• Part Number: AO-10778-97
• Package Quantity: EACH

These Pitot Tubes are designed specifically for flow measurement of dirty, particulate laden air or gas streams typical in environmental testing. Large 5/16"diameter stainless steel tubing resists plugging under harsh, sooty conditions which quickly block conventional flow sensors. Total and static pressure tubes are precisely aligned and welded together every six inches for maximum accuracy, strength and long term durability. Versatile 1/8" female NPT connections easily adapt to any type of pipe or tubing. A pair of 1/8"NPT to 3/16"I.D. tubing adapters is included plus a handy molded vinyl cap to protect tip when not in use. Supplied with complete instructions and air velocity calculator slide chart. FEATURES Meets EPA specifications 40CFR (ch. 1) Long lasting, welded stainless steel construction 1/8"NPT female connections, permanently welded Rated to 1500°F (815°C)

Visit Store Now !!

Detail Products

Detail Reviews

2-73-R-60GPM:Direct Read Flowmeter 316ss Right Flow Direct Reading Flow Meter

2-73-R-60GPM:Direct Read Flowmeter 316ss Right Flow Direct Reading Flow Meter Reviews

Other Picture

2-73-R-60GPM:Direct Read Flowmeter 316ss Right Flow Direct Reading Flow Meter Feature

• RCM Direct Reading Stainless Steel Flow Meters
• Description: Differential Pressure Flowmeter
• Max operating temperature (° F): 212
• Max operating temperature (° C): 100
• CE Compliance: Yes
• Brand: RCM
• Model: 2-73-R-60GPM
• Part Number: AO-32483-23
• Package Quantity: EACH

Direct Reading Flow Meters for Process Fluids, Compressed Gas Flow and Saturated Steam Optional 4-20 mA Output Signal for Chart Recorders and Dataloggers Optional Setpoint Switches for Sensing Flow Rates FEATURES Sturdy in-line metal construction to withstand piping stresses without breaking Black on white dial won't crack, glaze or become hard to read with age Expanded 3.5" (90mm) 270&Deg; analog dial for

Visit Store Now !!

Detail Products

Detail Reviews

General-Purpose Acrylic In-Line Flowmeter for Liquids; 1 to 10 GPM, 3/4" NPT(F) Adapter

General-Purpose Acrylic In-Line Flowmeter for Liquids; 1 to 10 GPM, 3/4" NPT(F) Adapter Reviews

Other Picture

General-Purpose Acrylic In-Line Flowmeter for Liquids; 1 to 10 GPM, 3/4" NPT(F) Adapter Feature

• Easy-View Acrylic In-Line Flowmeters
• Choose the high/low level alarm meters to monitor critical flow points.
• Units designed for in-line installation.
• General purpose liquid flowmeters feature easy-to-read dual scales (GPM/LPM).
• Polypropylene-reinforced fittings have aluminum stress rings for added strength.
• Machined high-quality acrylic rod stock, polished to a clear-as-glass finish.
• Flow ranges up to 50 GPM with model 32477-82.
• Description: Variable Area, Direct Reading Flowmeter
• Dimensions: 11"H x 1-3/4" dia.
• Accuracy: ±5% of reading
• Material (fitting): Polypropylene-reinforced with aluminum stress rings
• Material (o-ring): Viton®
• Material (Housing): Acrylic
• Material (float): 316 SS
• Max operating temperature (° F): 150
• Max operating temperature (° C): 65
• Max pressure: 150 psi
• Process connection: 3/4" NPT(F)
• Repeatability: ±1%
• Model: F-40750LN-12
• Part Number: AO-32477-20
• Package Quantity: EACH

General-Purpose Acrylic Flowmeters are for liquids or air. Models for liquids have both English and metric direct-reading scales; models for air have English direct-reading scales only. Large-Body Flowmeters are for use with liquids and are direct reading, with PVC floats and 11/2'' NPT(M) PVC adapters. Flowmeters with High/Low Level Alarm are for use with liquids and feature an adjustable aluminum sensor bezel clamp with an enclosed one-watt reed switch. Two lead wires are included for hookup to your own electronics.

Visit Store Now !!

Detail Products

Detail Reviews

Insertion Magmeter without display, PP and 316L SST materials, 5" to 8" pipe size, Frequency or Digi

Insertion Magmeter without display, PP and 316L SST materials, 5" to 8" pipe size, Frequency or Digi Reviews

Other Picture

Insertion Magmeter without display, PP and 316L SST materials, 5" to 8" pipe size, Frequency or Digi Feature

• +GF+ Signet Insertion Magmeter Flow Sensors
• Accurate measurement even in dirty liquids
• Bi-directional flow
• No moving parts
• No pressure drop
• Description: Magnetic Flow Sensor
• Max operating temperature (° F): 185
• Max operating temperature (° C): 85
• Manufacturer number: 3-2551-P111
• Model: 3-2551-P111
• Part Number: AO-32486-52
• Package Quantity: EACH

These Signet magmeters are an insertion-style magnetic flow sensor that features no moving parts. The patented sensor design provides long-term reliability with minimal maintenance. Typical applications include flow monitoring and control in chemical processing, water and wastewater management, pool and spa monitoring, irrigation control, and water distribution. Use together with the Signet installation fittings on page 747 for automatic sensor alignment and insertion depth. Use the +GF+ Signet fittings on page 747 for installation, and the +GF+ Signet flow monitors and controllers on pages 764 to 765 for full installation options. These versatile, simple-to-install sensors deliver accurate flow measurement over a wide dynamic range in pipe sizes ranging from ½" to 8", satisfy

Visit Store Now !!

Detail Products

Detail Reviews

Brass Sensor/Fittings; 350 psi max, sensor module brass 1/2"npt

Brass Sensor/Fittings; 350 psi max, sensor module brass 1/2"npt Reviews

Other Picture

Brass Sensor/Fittings; 350 psi max, sensor module brass 1/2"npt Feature

• Sensors/Fittings
• Modular in-line design offers the flexibility of building your system to meet your application
• In-line rotor sensor and pipe fitting are built into one piece for
• easy installation
• Accuracy: 1% of reading within 1.6 to 32.9 ft/sec;5% of reading under 1.6 ft/sec
• Max operating temperature (° F): 212
• Max operating temperature (° C): 100
• Repeatability: ±0.4% of reading
• Manufacturer number: 423986F
• Model: 423986F
• Part Number: AO-33117-05
• Package Quantity: EACH

Economically measure continuous liquid flow using these new in-line rotor flowmeter systems. To complete your system, simply select a sensor/fitting then an output or display module. All it takes is a quick 1/4 turn to mount the module on the sensor and you are ready to go! Choose from three types of modules: signal output without display, sensor-mounted display, or remote display. Order signal output module without display to send signals to a computer, datalogger, or recorder. Mount remote display module up to 30 feet away from the sensor-ideal for hard-to-reach locations. Sensor-mounted display module mounts directly on the sensor/fitting to provide flow rate and total measurements. A helpful hint when ordering the in-line rotor flowmeter system. Step 1: Pick a sensor/fitting using the flow curve below. Step 2: If you need a display, go to step 3. If you do not need a display, order one of the output modules without display . Step 3: If you want the display at the point of installation, order one of the sensor-mounted display. Or, order a remote display module to send signals up to 30 feet. Sensor/Fittings These paddle-wheel sensors are ideal for measuring both neutral and aggressive, solid-free liquids. Built-in pipe fittings ensure simple installation into pipes from 1/2" up to 2". Mount sensor/fittings horizontally or vertically. Choose from polyvinyl chloride (PVC), brass, or stainless steel (SS) sensor/fittings. PVC models come with true union fittings (solvent/fusion connection). Order brass and SS models with NPT(F) fittings for high temperature or high pressure application. SS models are especially ideal for measuring aggressive fluids. Wetted parts are polyvinylidene fluoride, ceramic, fluoropolymer, and PVC, brass, or SS.

Visit Store Now !!

Detail Products

Detail Reviews